Minggu, 01 Juli 2007

Berbagai Tipe RouterBOARD untuk Access Point

RouterBOARD Untuk Access Point:

RB/5AP MikroTik outdoor access point
RB/5AP2 MikroTik outdoor access point with two wireless cards
RB/5HS MikroTik Hotspot Access Point
RB/5LC3 RouterBOARD 532 Kit /w PoE
RB/5LC2 RouterBOARD 532 Kit
RB/5EX Multiport RouterBOARD kit
RB/5LD3 RouterBOARD 532 outdoor kit

Spesifikasi Router Board Mikrotik untuk berbagai Kebutuhan

Berikut merupakan spesifikasi hardware yang dibutuhkan untuk Infrastruktur Wireless :

5 GHz Base Stations

RB/APO MikroTik 5GHz Access Point OUTDOOR Package

5 GHz Client Packages
RIC/522 5.1-5.8Ghz Integrated Router Antenna
RIC/522E 5.1-5.8Ghz Integrated Router Antenna
RB/RPO MikroTik 5GHz OUTDOOR Client Package

5 GHz Repeaters
RB/BCO MikroTik 5GHz Repeater Outdoor Package

5 GHz All in Ones
RB/B2O MikroTik 5GHz Access Point OUTDOOR Package with Directional Antenna
RB/B4O MikroTik 5GHz Outdoor Access Point Package with Three Directional Antennas
RB/OM18 MikroTik 2.4GHz Integrated Access Point + Backbone
RB/KAO MikroTik 2.4GHz Access Point OUTDOOR Package

2.4GHz Client Packages
RB/2018 MikroTik 2.4GHz Client Package with Integrated 18 dBi Antenna

The dude network monitoring dari mikrotik

Anda kesulitan memantau jaringan LAN/ WAN, atau anda penguna Whats up?
Mikrotikers gak usah khawatir, sekarang ada "the Dude" sebuah program free dari mikrotik yg berfungsi untuk network monitoring.

The Dude network monitor is a new application by MikroTik which can dramatically improve the way you manage your network environment. It will automatically scan all devices within specified subnets, draw and layout a map of your networks, monitor services of your devices and alert you in case some service has problems.

Some of it's features:
  • The Dude is free of charge!
  • Auto network discovery and layout
  • Discovers any type or brand of device
  • Device, Link monitoring, and notifications
  • Includes SVG icons for devices, and supports custom icons and backgrounds
  • Easy installation and usage
  • Allows you to draw your own maps and add custom devices
  • Supports SNMP, ICMP, DNS and TCP monitoring for devices that support it
  • Individual Link usage monitoring and graphs
  • Direct access to remote control tools for device management
  • Supports remote Dude server and local client
  • Runs in Linux Wine environment, MacOS Darwine, and Windows
  • Best price/value ratio compared to other products (free of charge)
download disini

Download manual mikrotik - ebook

Ada e book dari situsnya mikrotik yang berbasis web/html, jumlahnya ratusan halaman, saya menyajikannya dalam bentuk pdf.
berikut juga dilengkapi tutorial mikrotik berbasis video.

Tutorial lengkap manual Mikrotik lengkap dari nol, sudah saya upload ke rapidshare , silahkan di download.

Reference Manual of MikroTik RouterOS :
http://rapidshare.com/files/31639172/refman2.9.pdf

Video Tutorial of MikroTik RouterOS :
http://rapidshare.com/files/31372948/Mikrotic.rar

salam mikrotiker :P

Jumat, 29 Juni 2007

Membangun hotspot dengan mikrotik

The MikroTik HotSpot Gateway enables providing of public network access for clients using wireless or wired network connections.

HotSpot Gateway features:

  • authentication of clients using local client database, or RADIUS server
  • accounting using local database, or RADIUS server
  • Walled-garden system (accessing some web pages without authorization)

Quick Setup Guide

The most noticeable difference in user experience setting up HotSpot system in version 2.9 from the previous RouterOS versions is that it has become in order of magnitude easier to set up a correctly working HotSpot system.

Given a router with two interfaces: Local (where HotSpot clients are connected to) and Public, which is connected to the Internet. To set up HotSpot on the Local interface:

  1. first, a valid IP config is required on both interfaces. This can be done with /setup command. In this example we will assume the configuration with DHCP server on the Local interface
  2. valid DNS configuration must be set up in the /ip dns submenu
  3. To put HotSpot on the Local interface, using the same IP address pool as DHCP server uses for that interface: /ip hotspot add interface=local address-pool=dhcp-pool-1
  4. and finally, add at least one HotSpot user: /ip hotspot user add name=admin

These simple steps should be sufficient to enable HotSpot system

Please find many HotSpot How-to's, which will answer most of your questions about configuring a HotSpot gateway, at the end of this manual. It is still recommended that you read and understand all the Description section below before deploying a HotSpot system.

for complete configuration please visit:
http://www.mikrotik.com/testdocs/ros/2.9/ip/hotspot.php

Rabu, 27 Juni 2007

Cara seting Mikrotik untuk Load balancing

Load balancing is implemented as equal cost multipath routing. With load balancing two or more gateways can be specified for the same destination. That applies to the default one as well

http://indonesiacyber.net/artikel/load_balancing_n_fail_over.pdf

Selasa, 05 Juni 2007

Install the Mikrotik OS using a CD

To install the RouterOS using a CD you will need a CD-writer and a blank CD. Burn the CD-image (an .iso file) to a CD. The archive with image can be downloaded here.

Follow the instructions to install RouterOS using CD-Install:

  1. After downloading the CD image from www.mikrotik.com you will have an ISO file on your computer:

    MT ISO image

  2. Open a CD Writing software, like Ahead NERO as in this example:

    Nero Burning ROM

  3. In the program, choose Burn Image entry from the Recorder menu (there should be similary named option in all major CD burning programs):

    BurnImage option

  4. Select the recently extracted ISO file and click Open:

    Open image

  5. Finally, click Burn button:

    Press Burn button

  6. Set the first boot device to CDROM in router's BIOS.
  7. After booting from CD you will see a menu where to choose packages to install:

                    Welcome to MikroTik Router Software installation

    Move around menu using 'p' and 'n' or arrow keys, select with 'spacebar'.
    Select all with 'a', minimum with 'm'. Press 'i' to install locally or 'r' to
    install remote router or 'q' to cancel and reboot.

    [X] system [ ] isdn [ ] synchronous
    [X] ppp [ ] lcd [ ] telephony
    [X] dhcp [ ] ntp [ ] ups
    [X] advanced-tools [ ] radiolan [ ] web-proxy
    [ ] arlan [ ] routerboard [ ] wireless
    [ ] gps [X] routing
    [ ] hotspot [X] security

    Follow the instructions, select needed packages, and press 'i' to install the software.

  8. You will be asked for 2 questions:

    Warning: all data on the disk will be erased!

    Continue? [y/n]

    Press [Y] to continue or [N] to abort the installation.

    Do you want to keep old configuration? [y/n]:

    You should choose whether you want to keep old configuration (press [Y]) or to erase the configuration permanently (press [N]) and continue without saving it. For a fresh installation, press [N].

    Creating partition...
    Formatting disk...

    The system will install selected packages. After that you will be prompted to press 'Enter'. Before doing that, remove the CD from your CD-Drive:

    Software installed.
    Press ENTER to reboot

Note: ref www.mikrotik.com